Carpet Cleaning

Carpet Cleaning – Everything You Need to Know about Carpet Cleaning Methods

carpet-cleaning

There are multiple variables for why we like to use carpets. For the most part, we use them because of their esthetics and their protective abilities. In order to keep our carpets in the best shape possible we have to imply carpet cleaning from time to time. Carpet cleaning reason may become an unnecessary wine spot or dot of another kind as well as an annual cleanup to put away all the dust and toxic materials that have naturally gathered after a period of constant usage.
No matter how hard we try to keep our carpet safe, there always comes the time for a carpet cleaning session. Whether or not you are going to clean the carpet by yourself, or contact the professional carpet cleaner – it will only benefit you to know some of the most common and successful ways to clean the carpet. Down below we are going to introduce you to them.

 

Hot water extraction carpet cleaning (steam cleaning):

The vast majority of professional carpet cleaners use hot water extraction also known as steam clearing. How water extraction is widely recognized in the cleaning industry as a single best and most effective method available. This is why steam cleaner companies imply this method as their primary option.

  • Here is how ‘HWE’ works:
    The main machine is an extractor. There are portable and fixed extractors. Portable extractors are carried to the clearing area and fixed extractors usually are built in the specially equipped car, that is parked somewhere nearby the area. Either way carpet cleaner has to have his tool, which is a scrub wand, with himself while performing a cleanup. A manual wand has one or more spray holes at the very end in order to inject the cleaning material into the carpet and a vacuum slot to vacuum it all the way back with all the dust and dirt. The results and the success of the entire process heavily depends on the effort that the carpet cleaner puts into the work. Carpet cleaner has to scrub the wand back and forth until the area gets clean. Sometimes it takes ten or more cleaning passes on each area to get satisfactory results.

Keep in mind that hot water extraction is actually what is also referred as steam cleaning. However some people may think that this is the same as the dry steam cleaning method that is used while performing cleaning with a typical portable steam cleaner. Dry steam cleaning is totally different method and most of the times useless when dealing with dirty carpets. Dry steam cleaning is a good way to clean up some minor dirt and dust from time to time however it does not provide a fully successful cleanup.

          You may want to check out⇒ Dry steam cleaning in depth.↵

 

Bonnet carpet cleaning:

bonnet carpet cleaning

Bonnet is simply a round buffer that scrubs the mixture of mist with rotating motion. Bonnet has an absorbent spin pad. The spin pad is repeatedly replaced with a new one, because it attracts soil and other materials and by so, after some time it lacks the ability to scrub. The absorbent pad has to be lubricated in order to perform the best. In the end Bonnet method is not considered as strictly dry-cleaning. However, because of the short drying time that is necessary after bonnet cleaning it is certainly a good alternative for more complex procedures.

    Bonnet carpet cleaning pros

  •  The bonnet system is fast and the user of the bonnet can easily cover large areas in relatively short period of time.
  • Drying period is relatively short with bonnet cleaning.
  • Using bonnet is easy and requires no advanced skills.

    Bonnet carpet cleaning cons

  • Bonnet cleaning does not have a capacity to get rid of soil entirely.
  • Deep cleaning can’t be achieved using bonnet
  • Absorbent pads have to be cleaned and washed themselves in between carpet cleaning processes.
  • When dealing with cut pile carpets, caution using is necessary.

     Don’t know what cut pile carpet is ? ⇒ Learn more about carpet types ↵

 

Encapsulation carpet cleaning: 

Encapsulation carpet cleaning

Encapsulation is a new method that rapidly becomes a popular alternative to traditional carpet cleaning techniques and many steam cleaner companies slowly shift to using this method. The whole thing comes down to the chemical process that literally encapsulates soil particles into dry residues. To say clearly – polymers make soil particles crystallized thus making them a lot easier to scrub. The process is made by using a special machine, counter rotating brush and a sprayer. The process has a high rate of successful and satisfactory results. The carpets are ready to be used immediately after the process is done thus there is no dry time at all.

    Why choose encapsulation carpet cleaning?

As mentioned above, encapsulation agents are 21st century tech development. Encapsulation cleaner separates soil with its brushes from the carpet and surrounds or encapsulates soul with a polymer. The soil is separated from the carpet and is dried out with the help of encapsulation machine. Dried soil looses the ability to reattach to the carpet. After soil is successfully dried and removed from the carpet you can easily remove it from the surface during regular maintenance. The polymer also has the ability to cover the carpet specifically so that is can slow down the rate in which the soil attaches to the fiber. Thus by using encapsulation carpet cleaning method not only are you cleaning the carpet from soil, but also making it capable to resist future soil attachments for longer periods of time. Learning to use the encapsulation machine and properly complete the cleaning process is fairly easy and can be learned within one proper educational session. Encapsulation carpet cleaning lowers the overall costs both for cleaners and for carpet owners.

    The encapsulation cleaning process comes down to these 4 (four) steps.

1. Step one – vacuum thoroughly

    80 % percent of soil is dry and can be removed without using a chemical. So, it is important to vacuum thoroughly your carpet before encapsulation process, because it will help you to remove the vast majority of the soil that really has no need to be encapsulated.

2. Step two – apply encapsulation chemical

     Choose the right chemical. Apply the chemical evenly on the surface of your carpet.

3. Step three – agitate chemical

    The chemical, which you have already chosen and have sprayed all over your carpet now needs to be agitated. You can use This basically means that the chemical must start encapsulating the soil with the help of the encapsulation machine that will evenly agitate the chemical deep within the carpet and above its’ surface.

4. Step four – remove the encapsulated soil

    After step three is completed, the soil is successfully removed from the carpet, is dried out and is ready to be removed from its’ surface.

 

Solvent extraction carpet cleaning:

A d-limonene compound is sprayed evenly upon the carped. After a dwelling period of approximately 10 minutes the carpet is extracted through a hot water extraction machine. Even though the method is not a completely dry one it is still thought as an alternative to traditional ‘HWE’ method because the dry time is 1-4 hours.

Before choosing the carpet cleaning method that is more suitable for your carpet make sure to get to know carpet types better.

          You may also like: Carpet types – find out the type of your carpet.↵